coachingjae.blogg.se

1. DIGITOUR MULTIMETER Q1467 MANUALS FREE HOW TO
2. DIGITOUR MULTIMETER Q1467 MANUALS FREE SERIAL NUMBER
3. DIGITOUR MULTIMETER Q1467 MANUALS FREE SERIAL
4. DIGITOUR MULTIMETER Q1467 MANUALS FREE MANUAL

HOW TO CHANGE THE INCLINE OF THE TREADMILL Incline To vary the intensity of your exercise, the incline of the treadmill can be changed there are three incline levels.Speed in either miles or kilometers.Īn “mph” or a “km/h” will appear in the display when the Speed The display features seven modes: mode is displayed to show which unit of measure- ment is selected. Note: The console can display distance and Follow your progress with the display.The first time the treadmill is used, observe the alignment of the walking belt, and align the walking belt if necessary (see page 17).

Note: If there is a sheet of clear plastic on the console, remove the plastic.

DIGITOUR MULTIMETER Q1467 MANUALS FREE MANUAL

To purchase a surge sup- pressor, see your local WESLO dealer or call the Adapter Surge Suppressor toll-free telephone number on the front cover of this manual and order part number 146148, or see your local electronics store. (see Grounded Outlet Box drawing 1 at the right).Securely tighten the plastic tie Ties nearest to the right Handrail. Insert as much of the Wire Harness (60) as possible down into the hole in the Screw right Handrail (59). Set the Console (55) in the Console Base (52). Then, remove the colored tie from the end of the Wire Harness. Route the Wire Harness (60) into the hole in the Ground Wire bottom of the Handrail and out of the hole in the left side as shown. Hold one of the Handrails (59) near the Right Upright (62). Attach the Right Upright with two Upright Bolts (65), two 3/8”. Hold the Right Upright (62) against the Base so the indicated large hole is in the position shown.

Have a second person hold the Base (46) in a vertical position as shown. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. Set the treadmill in a cleared area and remove all packing materials do not dispose of the packing materials until assembly is completed.

DIGITOUR MULTIMETER Q1467 MANUALS FREE SERIAL

The serial advanced technology with innovative design to let you number can be found on a decal attached to the. The CADENCE C44 treadmill combines number of the treadmill is WLTL29305.2.

DIGITOUR MULTIMETER Q1467 MANUALS FREE SERIAL NUMBER

Never drop or insert any object into any other than the procedures in this manual opening. Motor hood unless instructed to do so by an authorized service representative. Inspect and properly tighten all parts of the described in this manual. When folding or moving the treadmill, make manual and order part number 146148, or see sure that the storage latch is fully closed. Your local WESLO dealer or call the toll-free telephone number on the front cover of this 22. To purchase a surge suppressor, see placing objects under the treadmill. Do not change the incline of the treadmill by page 10.